Reference Guide

Property Description
CIM_ManagedElement that are known to be pending and are in the process of being
applied. A value of 0 Unknown indicates that the referenced instance of CIM_SettingData
may represent the last configuration applied to the referenced CIM_ManagedElement. A
value of
2 (Is Pending) indicates that the referenced instance of CIM_SettingData
represents outstanding changes to the configuration of the referenced
CIM_ManagedElement that are known to be pending. A value of
3 (Is Not Pending)
indicates that the referenced instance of CIM_SettingData does not represent outstanding
changes to the configuration of the referenced CIM_ManagedElement.
Possible values are:
• 0 = Unknown
• 2 = Is Pending
• 3 = Is Not Pending
• .. = DMTF Reserved
• 32768.. = Vendor Reserved
ManagedElement
The managed element.
SettingData
The SettingData object that is associated with the element.
DCIM_OrderedMemberOfCollection
Table 132. OrderedMemberOfCollection
Property Description
AssignedSequence
AssignedSequence is an unsigned integer n that indicates the relative position of members
within a Collection. When n is a positive integer, it indicates a place in the sequence of
members, with smaller integers indicating earlier positions in the sequence. The special
value
0 indicates don't care. If two or more members have the same non-zero sequence
number, then the ordering between those members is irrelevant, but they must all be
ordered at the appropriate place in the overall sequence. A series of examples will make
ordering of members clearer: If all members have the same sequence number, regardless of
whether it is 0 or non-zero, any order is acceptable. The values are: 1:MEMBER A
2:MEMBER B 1:MEMBER C 3:MEMBER D indicate two acceptable orders: A,C,B,D or
C,A,B,D, because A and C can be ordered in either sequence, but only at the
1 position.
NOTE: The non-zero sequence numbers do not need to start with 1, and they
do not need to be consecutive. However, the sequence numbers must reflect
their relative magnitude.
Collection
The Collection that aggregates members.
Member
The aggregated member of the Collection.
DCIM_MemberOfCollection
Table 133. MemberOfCollection
Property Description
Collection
The Collection that aggregates members.
Member
The aggregated member of the Collection.
Dell Command | Monitor 10.2.1 classes and properties 233