Reference Guide

BIOS Settings Name Description Supported
Operating
System(s)
• Disable
• Enable
Intel AMT Capability
Set the Intel Active Management Technology (AMT) capability.
Possible values:
• Enabled - If Intel Active Management Technology is
enabled, MEBx is available through the F12 menu and you
can provision AMT. MEBx may not be not accessible if
OROM Keyboard Access is disabled.
• Disabled - If Intel Active Management Technology is
disabled, MEBx is not available in pre-boot. Once disabled,
Intel Active Management Technology can only be enabled
through the BIOS interface. If the Intel AMT is already
provisioned, AMT cannot be disabled. Un-provisioning AMT
is required to disable AMT.
• Restrict MEBx Access - If Intel Active Management
Technology is enabled, MEBx is not available in pre-boot but
you can provision AMT from the operating system.
Microsoft Windows,
Linux
Enable AMD SmartShift
Sets the AMD SmartShift.
Possible values:
• Enable - On a discrete GPU system, AMD SmartShift allows
the system’s CPU and discrete GPU to share the power
limits. AMD SmartShift allows the potential performance that
increases within the systems power or thermal limitation.
• Disable - AMD SmartShift feature is disabled.
Microsoft Windows,
Linux
AMD TSME
Sets the AMD Transparent Secure Memory Encryption (TSME).
Possible values:
• Enabled - AMD Transparent Secure Memory Encryption
(TSME) allows encryption of contents during residing on the
memory DIMMS.
NOTE: For best results while diagnosing potential
memory DIMM issues, turn off this feature prior to
running diagnostic functions or tools.
•
Disabled - AMD Transparent Secure Memory Encryption
(TSME) does not allow encryption on the memory DIMMS.
Microsoft Windows,
Linux
Analog Digital Interface Mode Channel 1
Sets the defined Analog/Digital Interface mode for channel 1.
Possible values are:
• 0 — Unused — Channel is unused.
• 1 — ADC Input — Sets the channel mode as Analog-to-
Digital Converter (ADC) input.
• 2 — DAC Output — Sets the channel mode as Digital-to-
Analog Converter (DAC) output.
• 3 — DAC and ADC — Sets the channel mode as DAC
output, but can be monitored through ADC input.
• 8 — GPIO — Sets the channel mode as General Purpose
Input or Output.
Microsoft Windows,
Linux
Analog Digital Interface Mode Channel 2
Sets the defined Analog/Digital Interface mode for channel 2.
Possible values are:
• 0 — Unused — Channel is unused.
Microsoft Windows,
Linux
244 BIOS settings supported in Dell Command | Monitor 10.2.1