Reference Guide

Dell Command | Monitor Event
(Windows event log Number)
Description
DiskCapacity (2034)
In the current version, two user-defined thresholds are used. An event is generated only
when the conditions of both thresholds are met. The first threshold, expressed as an
absolute value in megabytes, specifies the size of the hard-disk drive to be monitored.
Hard-disk drives with a capacity smaller than the specified size are ignored. The second
threshold is expressed as a percentage of the hard-disk drive size. An event is generated
when the available free space on one of the monitored hard-disk drives falls below this
percentage.
NumberOfProcessorsIncreased (2035)
Number of processors on the system has increased.
NumberOfProcessorsDecreased
(2036)
A processor has been removed.
HDD Smart Failure(2037)
• A hard-disk drive condition has occurred that may eventually lead to a hard-disk drive
failure.
• Error message is displayed when the current value exceeds the threshold value.
• Warning message is displayed when the current value exceeds the custom threshold
value.
NOTE: Extended Error and Warning messages are supported only on
Embedded box personal computer 3000/5000.
DiskSizeIncreased (2038)
The size of at least one hard-disk drive has increased.
DiskSizeDecreased (2039)
The size of at least one hard-disk drive has decreased.
Alerts in Dell Command | Monitor 10.2.1 305