Reference Guide

Property Description
• 4107 = ISDN D Channel Endpoint
• 4108 = BGP
• 4109 = OSPF
• 4110 = UDP
• 4111 = TCP
• 4112 = 802.11a
• 4113 = 802.11b
• 4114 = 802.11g
• 4115 = 802.11h
• 4200 = NFS
• 4201 = CIFS
• 4202 = DAFS
• 4203 = WebDAV
• 4204 = HTTP
• 4205 = FTP
• 4300 = NDMP
• 4400 = Telnet
• 4401 = SSH
• 4402 = SM CLP
• 4403 = SMTP
• 4404 = LDAP
• 4405 = RDP
• 4406 = HTTPS
• .. = DMTF Reserved
• 32768.. = Vendor Reserved
NOTE:
If the ProtocolIFType is set to 1 (Other), then the type information
should be provided in the OtherTypeDescription string property.
RequestedState
An integer enumeration that indicates the last requested or desired state for the
element, irrespective of the mechanism through which it was requested. The actual
state of the element is represented by EnabledState. This property is provided to
compare the last requested and current enabled or disabled states.
NOTE: When EnabledState is set to 5 (Not Applicable), then this property
has no meaning. See the EnabledState property description for explanations
of the values in the RequestedState enumeration.
NOTE: The value No Change (5) has been deprecated instead of indicating
the last requested state is Unknown (0). If the last requested or desired
state is unknown, RequestedState should have the value Unknown (0), but
may have the value No Change (5).
There are two new values in RequestedState that build on the statuses of EnabledState.
These are Reboot (10) and Reset (11).
Shut Down requests an orderly transition to the Disabled state, and may involve
removing power, to completely erase any existing state. The Disabled state requests an
immediate disabling of the element, such that it will not execute or accept any
commands or processing requests. This property is set as the result of a method
invocation (such as Start or StopService on CIM_Service), or can be overridden and
defined as WRITEable in a subclass. The method approach is considered superior to a
WRITEable property, because it allows an explicit invocation of the operation and the
return of a result code. If knowledge of the last RequestedState is not supported for the
EnabledLogicalElement, the property is NULL or has the value
12 Not Applicable.
Possible values are:
• 0 = Unknown — Indicates the last requested state for the element is unknown.
• 2 = Enabled
Dell Command | Monitor 10.2.1 classes and properties
43