Reference Guide

Property Description
• 8 = Deferred — Indicates that the element may be completing
commands, but will queue any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a
restricted mode.
• 10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
ErrorMethodology
ErrorMethodology for Memory is a string property that indicates
whether parity or CRC algorithms, ECC or other mechanisms are
used. Details on the algorithm can also be supplied.
FailOverState
An integer enumeration indicating that active memory has failed
and the spare or backup memory may have taken over.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = None
• 3 = Active
HealthState
Indicates the current health of the element. This attribute
expresses the health of this element but not necessarily that of its
subcomponents.
Possible values are:
• 0 = Unknown — The implementation cannot report on
HealthState at this time. DMTF has reserved the unused
portion of the continuum for additional HealthStates in the
future.
• 5 = OK — The element is fully functional and is operating
within normal operational parameters and without error.
• 10 = Degraded/Warning — The element is in working order and
all functionality is provided. However, the element is not
working to the best of its abilities. For example, the element
may not be operating at optimal performance or it may be
reporting recoverable errors.
• 15 = Minor failure — All functionality is available but some may
be degraded.
• 20 = Major failure — The element is failing. It is possible that
some or all of the functionality of this component is degraded
or not working.
• 25 = Critical failure — The element is non-functional and
recovery may not be possible.
• 30 = Non-recoverable error — The element has completely
failed, and recovery is not possible. All functionality provided by
this element has been lost.
• .. = DMTF Reserved
NumberOfBlocks
Total number of logically contiguous blocks, of size Block Size,
which form this Extent. The total size of the Extent can be
calculated by multiplying BlockSize by NumberOfBlocks. If the
BlockSize is
1, this property is the total size of the Extent.
OperationalStatus
Indicates the current statuses of the element. Various operational
statuses are defined. Many of the enumeration's values are self-
explanatory.
Possible values are:
84 Dell Command | Monitor 10.2.1 classes and properties