Reference Guide

Property Description
• 0 = Unknown
• 1 = Other
• 2 = Enabled — Indicates that the element is or could be
executing commands, will process any queued commands, and
queues new requests.
• 3 = Disabled — Indicates that the element will not execute
commands and will drop any new requests.
• 4 = Shutting Down — Indicates that the element is in the
process of going to a Disabled state.
• 5 = Not Applicable — Indicates the element does not support
being enabled or disabled.
• 6 = Enabled but Offline — Indicates that the element may be
completing commands, and will drop any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing
commands, but will queue any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a
restricted mode.
• 10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
FunctionNumber
The function number for this PCI device.
HealthState
Indicates the current health of the element. This attribute
expresses the health of this element but not necessarily that of its
subcomponents.
Possible values are:
• 0 = Unknown — The implementation cannot report on
HealthState at this time. DMTF has reserved the unused
portion of the continuum for additional HealthStates in the
future.
• 5 = OK — The element is fully functional and is operating
within normal operational parameters and without error.
• 10 = Degraded/Warning — The element is in working order and
all functionality is provided. However, the element is not
working to the best of its abilities. For example, the element
may not be operating at optimal performance or it may be
reporting recoverable errors.
• 15 = Minor failure — All functionality is available but some may
be degraded.
• 20 = Major failure — The element is failing. It is possible that
some or all of the functionality of this component is degraded
or not working.
• 25 = Critical failure — The element is non-functional and
recovery may not be possible.
• 30 = Non-recoverable error — The element has completely
failed, and recovery is not possible. All functionality provided by
this element has been lost.
• .. = DMTF Reserved
StatusInfo
The use of this method is deprecated instead of a more clearly
named property (EnabledState) that is inherited from
ManagedSystemElement and that has additional enumerated
values. Deprecated description: The StatusInfo property indicates
whether the Logical Device is in an enabled state (value =
3),
disabled state (value = 4), some other state (value = 1), or an
Dell Command | Monitor 10.2.1 classes and properties 89