Reference Guide
Property Description
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process of
transitioning.
VariableSpeed
Indication of whether the fan supports variable speeds.
DCIM_IndicatorLED
Table 27. IndicatorLED
Property Description
Color
Color This property indicates the current color of the LED. If the value of the
ActivationState property is 4 (Off) this property indicates the color of the LED the last
time it was lit, or has the value 2 (Not Applicable).
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Not Applicable
• 3 = White
• 4 = Red
• 5 = Green
• 6 = Blue
• 7 = Orange
• 8 = Yellow
• 9 = Black
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
ControlMode
ControlMode indicates the current control mode for the LED.
Possible values are:
• 2 = Automatic — Indicates the state of the LED is being controlled by the management
infrastructure.
• 3 = Manual — Indicates the state of the LED is being controlled by a management
client.
• 4 = Test — Indicates the LED is in a test mode.
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
ControlPattern
An LED may exhibit a range of behavior from very simple (ex. solid on) to very complicated
(ex. a series of blinks of alternating color and duration). ControlPattern specifies the vendor
or standard behavior exhibited by the LED if it cannot be described using one of the
standard behaviors listed for the ActivationState property.
If ActivationState has the value 5 (ControlPattern), the ControlPattern property is not
NULL.
The value of ControlPattern is constructed using the following preferred algorithm:
<OrgID>::<Pattern>
Where <OrgID> and < Pattern> are separated by two colons (::), and where <OrgID>
includes a copyrighted, trademarked, or otherwise unique name that is owned by the
business entity that is creating or defining the ControlPattern or that is a registered ID
assigned to the business entity by a recognized global authority. If the definition of the
value is specified by the DMTF, the value of <OrgID> is
DMTF. <Pattern> is chosen by the
Dell Command | Monitor 10.2.1 classes and properties 97