Reference Guide

DCIM_AssociatedPowerManagementService
Table 139. AssociatedPowerManagementService
Property Description
OtherPowerState
A string describing the additional power management state of the element, used when the
PowerState is set to the value 1, Other.
OtherRequestedPowerState
A string describing the additional power management state of the element, used when the
RequestedPowerState is set to the value 1, Other.
PowerOnTime
The time when the element will be powered on again, used when the RequestedPowerState
has the value 2, On, 5, Power Cycle (Off - Soft) or 6, Power Cycle (Off - Hard).
PowerState
The current power state of the associated Managed System Element.
Possible values are:
• 1 = Other
• 2 = On
• 3 = Sleep - Light
• 4 = Sleep -Deep
• 5 = Power Cycle (Off - Soft)
• 6 = Off - Hard
• 7 = Hibernate (Off - Soft)
• 8 = Off - Soft
• 9 = Power Cycle (Off-Hard)
• 10 = Master Bus Reset
• 11 = Diagnostic Interrupt (NMI)
• 12 = Off - Soft Graceful
• 13 = Off - Hard Graceful
• 14 = Master Bus Reset Graceful
• 15 = Power Cycle (Off - Soft Graceful)
• 16 = Power Cycle (Off - Hard Graceful)
• .. = DMTF Reserved
• 0x7FFF..0xFFFF = Vendor Specific
RequestedPowerState
The desired or the last requested power state of the associated Managed System Element,
irrespective of the mechanism through which the request was made. If the requested power
state is unknown, then the property has the value of 0 Unknown. If the property has no
meaning or is not supported, then the property has the value
12 Not Applicable.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = On
• 3 = Sleep - Light
• 4 = Sleep -_Deep
• 5 = Power Cycle (Off - Soft)
• 6 = Off - Hard
• 7 = Hibernate (Off - Soft)
• 8 = Off - Soft
• 9 = Power Cycle (Off-Hard)
• 10 = Master Bus Reset
• 11 = Diagnostic Interrupt (NMI)
• 12 = Not Applicable
• 13 = Off - Soft Graceful
• 14 = Off - Hard Graceful
• 15 = Master Bus Reset Graceful
236 Dell Command | Monitor 10.2.1 classes and properties