Reference Guide

Property Description
• 8 = 8200K
• 9 = 9300K
• 1011 = 10000K
• 12 = 11500K
• 13 = User 1
• 14 = User
• .. = User 3
• 32768..65535 = DMTF Reserved
CommunicationStatus
Indicates the ability of the instrumentation to communicate with
the underlying ManagedElement. A Null return indicates the
implementation (provider) does not implement this property.
Possible values are:
• 0 = Unknown — Indicates that the implementation is in general
capable of returning this property, but is unable to do so now.
• 1 = Not Available — Indicates that the implementation
(provider) is capable of returning a value for this property, but
not ever for this particular piece of hardware/software or the
property is intentionally not used because it adds no meaningful
information (as in the case of a property that is intended to add
additional info to another property).
• 2 = Communication OK — indicates that communication is
established with the element, but does not convey any quality
of service.
• 3 = Lost Communication — Indicates that the Managed
Element is known to exist and has been contacted successfully
in the past, but is unreachable.
• 4 = No Contact — Indicates that the monitoring system has
knowledge of this element, but has never been able to establish
communications with it.
• .. = DMTF Reserved
• 0x8000.. = Vendor Reserved
CompositSyncSignalOnGreenVideoSupported
Composite Sync Signal on Green video is supported.
CompositSyncSignalOnHorizontalSupported
Composite Sync Signal on Horizontal is supported.
ContinuousFrequency
For EDID 1.3, this bit indicated support for or no support for
GTF(using the default GTF parameter values). For EDID 1.4 this bit
has been redefined to indicate Continuous frequency(1) or Non-
Continuous Frequency(0).
Contrast
This property represents the contrast of the video output. The
property value is from 0 to the MaxContrast property value. If the
Contrast property is implemented but the contrast is unknown at
the time, the property has a value 0x80000000.
CreationClassName
Indicates the name of the class or the subclass used in the creation
of an instance. When used with the other key properties of this
class, this property allows all instances of this class and its
subclasses to be uniquely identified.
CurrentResolutionH
This property indicated the current horizontal resolution in pixels.
CurrentResolutionV
This property indicated the current vertical resolution in pixels.
Description
Provides a textual description of the object.
28 Dell Command | Monitor 10.2.1 classes and properties