Reference Guide

Property Description
• 4 = Shutting Down — Indicates that the element is in the process of going to a Disabled
state.
• 5 = Not Applicable — Indicates the element does not support being enabled or disabled.
• 6 = Enabled but Offline — Indicates that the element may be completing commands,
and will drop any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing commands, but will
queue any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a restricted mode.
• 10 = Starting — Indicates that the element is in the process of going to an Enabled
state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
HealthState
Indicates the current health of the element. This attribute expresses the health of this
element but not necessarily that of its subcomponents.
Possible values are:
• 0 = Unknown — The implementation cannot report on HealthState at this time.
• 5 = OK — The element is fully functional and is operating within normal operational
parameters and without error.
• 10 = Degraded/Warning — The element is in working order and all functionality is
provided. However, the element is not working to the best of its abilities. For example,
the element may not be operating at optimal performance or it may be reporting
recoverable errors.
• 15 = Minor failure — All functionality is available but some may be degraded.
• 20 = Major failure — The element is failing. It is possible that some or all of the
functionality of this component is degraded or not working.
• 25 = Critical failure — The element is non-functional and recovery may not be possible.
• 30 = Non-recoverable error — The element has completely failed, and recovery is not
possible. All functionality provided by this element has been lost.
• .. = DMTF Reserved
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process of
transitioning.
Dell Command | Monitor 10.2.1 classes and properties 99