Reference Guide

Property Description
unknown state (value = 2). If this property does not apply to the
LogicalDevice, the value 5 (Not Applicable) should be used. If a
Device is Enabled (value = 3), it has been powered up and is
configured and operational. The Device may or may not be
functionally active, depending on whether its Availability (or
AdditionalAvailability) indicates that it is Running/Full Power
(value = 3) or Off line (value = 8). In an enabled but offline
mode, a Device may be performing out-of-band requests, such as
running Diagnostics. If StatusInfo is Disabled (value = 4), a Device
can only be
enabled or powered off. In a personal computer
environment, disabled means that the driver of the device is not
available in the stack. In other environments, a Device can be
disabled by removing its configuration file. A disabled device is
physically present in a System and consuming resources, but it
cannot be communicated with until a driver is loaded, a
configuration file is loaded, or some other
enabling activity has
occurred.
Possible values are:
• 1 = Other
• 2 = Unknown
• 3 = Enabled
• 4 = Disabled
• 5 = Not Applicable
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not
support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element
is in the process of transitioning.
DCIM_DisplayController
Table 25. DisplayController
Property Description
CapabilityDescriptions
An array of free-form strings providing more detailed explanations for any of the video
Accelerator features indicated in the Capabilities array. Note, each entry of this array is
related to the entry in the Capabilities array that is located at the same index.
90 Dell Command | Monitor 10.2.1 classes and properties