Dell Command | Monitor 9.
Version 9.0 Release Date: September 2014 Previous Version OMCI 8.2.1 The Dell Command | Monitor (formally known as OpenManage™ Client Instrumentation or OMCI) enables remote management application programs to access the client's system information, monitor the status, or change the state and shut it down remotely.
• Microsoft Windows 7 Ultimate (32-bit and 64-bit) SP1 • Windows 7 Enterprise Environment (32-bit and 64-bit) SP1 • Windows 8 (32 and 64 bit) • Windows 8 Pro (32 and 64 bit) • Windows 8 Enterprise (32 and 64 bit) • Windows 8.1 (32 and 64 bit) • Windows 8.1 Pro (32 and 64 bit) • Windows 8.1 Enterprise (32 and 64 bit) What’s New • Rebranded Open Manage Client Instrumentation(OMCI) to Dell Command | Monitor. • Support for monitoring and alerting for LSI Controller and devices.
Issue 3: Deployment of Command | Monitor using Group Policy Objects (GPO). Issue 4: Alerts are generated for voltage, current, temperature and cooling devices (fan) sensors. Important Notes Simple Network Management Protocol (SNMP) Support: You can enable SNMP support while installing Command | Monitor. The Management Information Base (MIB) file (10892.mib) is no longer shared between Server Administrator and Command | Monitor.
Issue 2: Enumeration of DCIM_ElementCapabilities class results in error Description: Enumeration of DCIM_ElementCapabilities class returns error through winrm on a few platforms. WMI studio and Wbemtest works fine. Resolution: Use WMI studio and WBEMtest tool to enumerate this class. Issue 3: dsm_sa_datamgr32 service stops responding while installing chipset driver Description: This issue occurs only when Command | Monitor is installed on some platforms before installing the chipset driver.
Issue 9: Configuring OROM UI Protection through DC | M results in the configuration of OROM keyboard access on the following Dell platforms : • Latitude E6x30,E5x30 • Dell Precision Mobile M4700,M4500 • Dell Precision Workstation T1650 • Optiplex 9010,7010 Issue 10: When BIOS password is enabled on a system, we cannot set the attributes Upper and Lower NonCritical Threshold of the DCIM_NumericSensor class.
Issue 16: The NonCritical threshold levels for voltage and current cannot be negative values. Issue 17: Setting the NonCritical threshold levels for fans is not supported. For the attribute SettableThreshold the NonCritical value can be set to Settable. Issue 18: For temperature probe, the Upper Critical Threshold level should be greater than 0.
Issue 26: OID table index in SNMP for most of the traps is 0. Issue 27: Degraded status and alert for physical disk is not supported with LSI Controllers. Issue 28: In LogEntry the element name for alerts is displayed as Alert Log Entry . Issue 29: When stopping the data manager service, an error message might be displayed saying the process cannot be stopped. But the service will be stopped.
− The system is running on Microsoft Windows NT based operating systems such as Windows 8.1, Windows 8, Windows 7 and Windows Vista. − For Windows Vista or later systems, .NET Framework 4.0 or later is installed. Installation Procedure For information and procedure for installing Command | Monitor, see the Command | Monitor – Installation Guide, available at dell.com/clientsystemsmanagement.
• To install and operate Command | Monitor, .NET Framework 4.0 or later is required on Windows operating systems. • For systems configured as RAID through Intel Rapid Storage Technology, if the RAID is in ‘verify and fix’ state, DC | M does not create instances of DCIM_PhysicalDiskView and DCIM_VirtualDiskView. The ‘verify and fix’ is a transition state and the RAID volume is engaged for handling the corresponding commands. • In silent mode (unattended) of installation, the system may restart itself.
Contacting Dell Note: Dell provides several online and telephone-based support and service options. If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer-service issues: 1. 2. 3. 4. 5. Go to dell.com/contactdell.