Dell Command | Monitor Version 9.
Anmerkungen, Vorsichtshinweise und Warnungen ANMERKUNG: Eine ANMERKUNG liefert wichtige Informationen, mit denen Sie den Computer besser einsetzen können. VORSICHT: Ein VORSICHTSHINWEIS macht darauf aufmerksam, dass bei Nichtbefolgung von Anweisungen eine Beschädigung der Hardware oder ein Verlust von Daten droht, und zeigt auf, wie derartige Probleme vermieden werden können.
Inhaltsverzeichnis 1 Einführung.............................................................................................................. 5 Dell Command | Monitor Übersicht..................................................................................................... 5 Command | Monitor-Architektur..........................................................................................................6 Was ist neu in dieser Version?.................................................................
BIOS-Verwaltungsprofil.................................................................................................................16 Startsteuerung................................................................................................................................16 Basis Desktop Mobile.....................................................................................................................17 Protokolleintrag.........................................................................
Einführung 1 Client Instrumentation bezeichnet Softwareanwendungen, welche die Remote-Verwaltung eines ClientSystems ermöglichen. Die Dell Command | Monitor (Command | Monitor)-Softwareanwendung ermöglicht die Remote-Verwaltung mithilfe von Anwendungsprogrammen für den Zugriff auf Unternehmensinformationen auf dem Client-System, die Überwachung des Status oder die Änderung des Zustands des Systems, z. B. das Remote-Herunterfahren des Systems.
Command | Monitor-Integration implementiert haben. Außerdem können Sie benutzerdefinierte Skripten anwenden, um auf wichtige Bereiche von Interesse zu zielen. Sie können diese Skripts zur Überwachung des Bestands, der BIOS-Einstellungen und des Systemzustands verwenden. ANMERKUNG: Standard-Installation aktiviert die SNMP-Unterstützung nicht. Weitere Informationen zum Aktivieren der SNMP-Unterstützung finden Sie im Dell Command | Monitor Installation Guide (Installationshandbuch) unter dell.
Die Informationen werden dann (umgekehrt über denselben Pfad) zur Verwaltungskonsole zurückgegeben. Was ist neu in dieser Version? • Dell OpenManage Client Instrumentation (OMCI) trägt jetzt den neuen Markennamen Dell Command | Monitor. • Unterstützung für Überwachung und für Warnmeldungen für LSI-RAID-Controller (Redundant Array of Independent Disks) • Unterstützung für Überwachung und für Warnmeldungen für alle Sensorensonden • Legacy-Namespaces (root/dellomci) werden nicht unterstützt.
• SNMP-Überwachung und -Traps Unterstützung für das CIM 2.17-Schema Command | Monitor entspricht dem CIM 2.17-Schema und umfasst zwei WMI-Anbieter: • WMI-Indikationsanbieter oder Abfrageagent • WMI-Instanzen- oder Methodenanbieter BIOS-Konfiguration Command | Monitor stellt die Möglichkeit zum Durchführen der BIOS-Konfiguration eines Systems bereit, einschließlich der Verwaltung seiner Startreihenfolge.
Remote-Aktivierungskonfiguration Command | Monitor unterstützt die Konfiguration von Remote-Aktivierungseinstellungen. Die RemoteAktivierung ist eine Funktion des Client-Systems und der Netzwerkschnittstellenkarte (NIC). Remote-Änderung von Systemeinstellungen Command | Monitor gibt IT-Administratoren die Möglichkeit, von Geschäftskunden BIOS-Einstellungen abzurufen und einzustellen, wie z. B. USB-Schnittstellenkonfiguration, Startreihenfolge und NICEinstellungen.
Standards und Protokolle 2 Command | Monitor verwendet Microsoft Windows Management Instrumentation (WMI) und aktiviert Web Services-Management (WSMAN)-Protokolle. Command | Monitor verwendet Simple Network Management Protocol (SNMP), um verschiedene Systemvariablen zu beschreiben.
Switches, Server, Workstations sowie die Mehrheit der Hardwarekomponenten. SNMP besteht aus einem Standardsatz für Netzwerkverwaltung, einschließlich eines Anwendungsschichtprotokolls, eines Datenbankschemas und eines Satzes von Datenobjekten. SNMP identifiziert Verwaltungsdaten in der Form von Variablen auf den Verwaltungssystemen, welche die Systemkonfiguration beschreiben. Diese Variablen können dann durch Verwaltungsanwendungen abgefragt werden.
ANMERKUNG: Um eine Remote-Verbindung zu WMI-Diensten herstellen zu können, müssen Sie sowohl auf dem lokalen als auch auf dem Remote-System über Administratorrechte verfügen. WSMAN Das WSMAN Protokoll ist ein offener DMTF-Standard, der ein SOAP (Simple Object Access Protocol)basiertes Protokoll für die Verwaltung von Servern, Geräten, Anwendungen und Webdiensten definiert. Es verwendet Daten des CIMOM, um die Verwaltung zu vereinfachen.
Systemanforderungen 3 Dieses Kapitel enthält Informationen zu den Hardware- und Softwareanforderungen für Command | Monitor. Hardwareanforderungen Anforderung Einzelheiten System Enterprise Client-System mit SMBIOS 2.3 oder höher. Softwareanforderungen Anforderung Einzelheiten Unterstütztes Betriebssystem • • • • Microsoft Windows 8.1 Microsoft Windows 8 Microsoft Windows 7 Microsoft Windows Vista Unterstütztes Framework • Microsoft .NET 4.
Benutzerszenarien 4 Dieses Kapitel beschreibt verschiedene Benutzerszenarien von Command | Monitor. Sie können Command | Monitor für folgende Zwecke einsetzen: • Bestandsverwaltung • Konfigurationsverwaltung • Überwachung des Funktionszustands • Profile Szenario 1: Bestandsverwaltung Ein Unternehmen, das viele Dell Systeme verwendet, konnte wegen Veränderungen seiner geschäftlichen und IT-Belegschaft keine genauen Bestandsaufnahmendaten führen.
Szenario 2: Konfigurationsverwaltung Ein Unternehmen beabsichtigt, die Client-Plattform zu standardisieren und jedes System über seinen Lebenszyklus zu verwalten. Als Teil dieses Unterfangens erwirbt das Unternehmen eine Suite von Hilfsprogrammen, mit der es die automatisierte Bereitstellung eines neuen Client-Betriebssystems unter Verwendung der Preboot Execution Environment (PXE) plant.
• Verwalten von Ereignissen durch einfaches Netzwerkverwaltungsprotokoll (SNMP, Simple Network Management Protocol). Weitere Informationen über Command | Monitor finden Sie im Referenzhandbuch Dell Command | Monitor Reference Guide unter dell.com/clientsystemsmanagement. Szenario 4: Profile IT-Administratoren sind mit der Verwaltung von Client-Systemen in Umgebungen mit mehreren Anbietern und verteilten Unternehmen betraut.
• Suchen Sie die aktuelle Startkonfiguration, indem Sie die Instanzen der Klasse DCIM_ElementSettingData aufzählen, deren Eigenschaft IsCurrent auf 1 eingestellt ist. Die Instanz DCIM_BootConfigSetting repräsentiert die aktuelle Startkonfiguration. Basis Desktop Mobile • Bestimmen Sie das Systemmodell, die Service-Tag-Nummer und Seriennummer, indem Sie die Instanz der Klasse DCIM_ComputerSystem aufzählen. • Führen Sie die DCIM_ComputerSystem.
• 18 Überprüfen Sie den Funktionszustand des Systemspeichers.
5 Verwenden von Dell Command | Monitor Hier können Sie die Informationen anzeigen, die Command | Monitor bereitstellt: • root\dcim\sysman (Standard) Command | Monitor stellt die Informationen durch Klassen in diesen Namespaces bereit. Weitere Informationen über die Klassen finden Sie im Referenzhandbuch Dell Command | Monitor Reference Guide unter dell.com/clientsystemsmanagement.
(Management Information Base) wird von Command | Monitor und Server Administrator gemeinsam verwendet. Command | Monitor verwendet ab Version 9.0 eine spezifische Client-OID (10909), mit der Konsolen Client-Systeme identifizieren können. Weitere Informationen über SNMP finden Sie im Referenzhandbuch Dell Command | Monitor SNMP Reference Guide unter dell.com/clientsystemsmanagement.
• ElementName = "Next Boot Configuration Setting : Boot List Type 1" Sie können festlegen, ob DCIM_BootConfigSetting UEFI repräsentiert, indem Sie die folgenden Eigenschaften verwenden: • InstanceID = "DCIM:BootConfigSetting:Next:2" • ElementName = "Next Boot Configuration Setting : Boot List Type 2" DCIM_BootSourceSetting Diese Klasse stellt die Startgeräte (oder Quellen) dar.
Einstellen der BIOS-Attribute In Dell Command | Monitor werden die folgenden Methoden hinzugefügt, um die Systemeinstellungen und den Zustand der lokalen oder Remote-Systeme zu ändern: • SetBIOSAttributes – Zum Ändern der BIOS-Einstellung • ChangeBootOrder – Zum Ändern der Startkonfiguration • RequestStateChange – Zum Herunterfahren und Neustarten des Systems • ManageTime – Gibt die Systemzeit wieder Sie können diese Methoden unter Verwendung von winrm, dem VB-Skript, Powershell-Befehlen, wmic, wbem
Häufig gestellte Fragen 6 Wie finde ich die Startreihenfolge (Sequenz) der Startkonfiguration mit Hilfe der Eigenschaft DCIM_OrderedComponent.AssignedSequence? Wenn einer DCIM_BootConfigSetting-Instanz (Legacy oder UEFI) mehrere DCIM_BootSourceSettingInstanzen (Startgeräte) durch Instanzen der DCIM_OrderedComponent-Zuordnung zugeordnet sind, wird der Wert der Eigenschaft DCIM_OrderedComponent.
Wie kann ich TechCenter-Skripts fehlerfrei ausführen? Nachfolgend sind die Voraussetzungen aufgeführt, die zur Ausführung von VBS-Skripts im Command | Monitor-Techcenterlink erfüllt sein müssen: 1. Konfigurieren Sie winrm unter Verwendung des Befehls winrm quickconfig auf dem System. 2. Überprüfen Sie folgendermaßen, ob der Token-Support auf dem System besteht: • Überprüfen Sie den F2-Bildschirm im BIOS-Setup.
Fehlerbehebung 7 Remote-Verbindung zu Windows Management Instrumentation kann nicht hergestellt werden Wenn CIM-Informationen (Gemeinsames Informationsmodell) für ein Remote-Client-Computersystem für die Verwaltungsanwendung nicht zur Verfügung stehen oder wenn eine Remote-BIOS-Erweiterung, die das DCOM (Verteiltes Komponenten-Objektmodell) verwendet, fehlschlägt, werden die folgenden Fehlermeldungen angezeigt: • Zugriff verweigert. • Win32: Der RPC-Server ist nicht verfügbar 1.
c. Wenn Sie IT Assistant verwenden, benutzen Sie das Administratorkonto, um die Subnetzermittlung für das Client-System zu konfigurieren. Geben Sie den Benutzernamen im Format \ ein. Wenn das System bereits ermittelt wurde, entfernen Sie es aus der Liste ermittelter Systeme, konfigurieren Sie die Subnetzermittlung für das System, und ermitteln Sie es dann erneut. ANMERKUNG: Dell empfiehlt die Verwendung von Dell OpenManage Essentials als Ersatz für IT Assistant.
Kontaktaufnahme mit Dell 8 ANMERKUNG: Wenn Sie nicht über eine aktive Internetverbindung verfügen, können Sie Kontaktinformationen auch auf Ihrer Auftragsbestätigung, dem Lieferschein, der Rechnung oder im Dell-Produktkatalog finden. Dell stellt verschiedene onlinebasierte und telefonische Support- und Serviceoptionen bereit. Da die Verfügbarkeit dieser Optionen je nach Land und Produkt variiert, stehen einige Services in Ihrer Region möglicherweise nicht zur Verfügung.
– Für Client Systems Management-Dokumente – dell.com/clientsystemsmanagement – Für OpenManage Connections Client Systems Management-Dokumente – dell.com/ connectionsclientsystemsmanagement • Gehen Sie auf der Dell Support-Website folgendermaßen vor: a. Rufen Sie die Website dell.com/support/home auf. b. Klicken Sie unter Allgemeiner Support auf Software & Sicherheit. c.