Dell Command | Monitor 9.1.
Version 9.1.2 Release Date: Jun 2016 Previous Version 9.1.1 The Dell Command | Monitor (formally known as OpenManage™ Client Instrumentation or OMCI) enables remote management application programs to access the client's system information, monitor the status, change the state, and shut it down remotely.
Linux • Ubuntu Snappy Core 15.04 (64-bit) • Ubuntu Desktop 16.04 (64-bit) NOTE: The operating system image must be downloaded from the Dell Canonical store only. What’s New • Support for new platforms: Dell Embedded Box PC 3000 series running Windows Dell Embedded Box PC 5000 series running Windows • Support for installing and uninstalling Dell Command | Monitor on Dell Embedded Box PCs running Ubuntu Desktop using Deb package • Support for new operating system: Ubuntu Desktop 16.
Issue: Hardware details are not displayed. Description: Hardware details are not displayed if the system has the following BIOS configurations: UEFI boot mode is enabled, and Secure boot is on. Fix: This issue has been resolved. Important Notes • DC|M 9.1.2 does not support Ubuntu Desktop 16.04 (64 bit) on Dell Edge Gateway 5000 series. • DC|M 9.1.2 does not support Ubuntu Snappy Core 15.04 (64 bit) on Dell Embedded Box PC 3000/ 5000 series. • All root\DCIM\SYSMAN namespace classes are prefixed with D
Issue: If the fan is not working as indicated by Health Status and OperationalStatus attributes, then the attribute Current Status will be blank. Issue: The NonCritical threshold levels for voltage and current cannot be negative values. Issue: Setting the NonCritical threshold levels for fans is not supported. For the attribute SettableThreshold the NonCritical value can be set to Settable. Issue: For temperature probe, the Upper Critical Threshold level should be greater than 0.
Description: Occasionally ‘Door Open’ indication gets generated due to multiple operations running at the same time. For example, the BIOS setting are enumerated and configured continuously in a stress run. Resolution: Chassis door open indication is repetitive and unless multiple alerts occurs, this should not be serviced. NOTE: This behavior is rarely noticed. This issue will be addressed in upcoming release. Issue: Setting up BIOS configuration may occationally fail.
Dell Edge Gateway 5000 Snappy Ubuntu Core 15.04 Dell Embedded Box PC 3000 Ubuntu Desktop 16.04 Dell Embedded Box PC 5000 Ubuntu Desktop 16.04 • • • Open Manage infrastruture (OMI) 1.0.8-2 HAPI Client side shared libraries 8.3.0 You have root access on the target system. This means that you must be authenticated on the target system as a user who is a member of the root user group. Other requirements • Active Dell EDM subscription. Go to http://www.cloudclientmanager.
installed processor does not support multi-core technology. In this case, changes to the multiple CPU cores are ineffective. • Change the auditing object access audit policy to enable auditing for the desired namespace in Windows Vista. For instructions about enabling auditing, see the Microsoft article: "Access to WMI Namespaces" at: http://msdn2.microsoft.com/en-us/library/Aa822575.aspx. For instructions about enabling the WMI logging, see the Microsoft article "WMI log Files" at: http://msdn2.microsoft.
Copyright © 2016 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. DellTM and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies.
