Administrator Guide

Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. In the right pane, click Edit Settings. The Edit Volume dialog box appears.
3. Select the Import to lowest tier checkbox.
Associate a Chargeback Department with a Volume
If Chargeback is enabled, you can assign a Chargeback Department to the volume to make sure the department is charged for the storage
used by the volume.
Steps
1. Click the Storage view.
2. In the Storage pane, select a Storage Center.
3. Click the Storage tab.
4. In the Storage tab navigation pane, select the volume you want to modify.
5. In the right pane, click Edit Settings. The Edit Volume dialog box appears.
6. Next to Chargeback Department, click Change. The Add Chargeback Department dialog box appears.
7. Select the appropriate department, then click OK.
8. Click OK to close the Edit Volume dialog box.
Configure a Space Consumption Limit for a Volume
Set a space consumption limit to specify the maximum space that can be used on the volume. This option is not available for SCv2000 or
SCv3000 series storage systems.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. In the right pane, click Edit Settings. The Edit Volume dialog box appears.
3. Configure the Space Consumption Limit options.
a) Select Enabled.
b) In the field, type the maximum space that can be used on the volume in kilobytes (KB), megabytes (MB), gigabytes (GB), or
terabytes (TB).
4. Click OK to close the Edit Advanced Volume Settings dialog box, then click OK to close the Edit Volume dialog box.
Configure an OpenVMS Unique Disk ID for a Volume
Configure an OpenVMS Unique Disk ID to identify the volume to servers running the OpenVMS operating system. You may need to reset
this value when recovering a volume from a snapshot. For example, if you map a volume to a server, create a snapshot, and then mount a
new view volume to the server, the new view volume has a new disk ID. To allow the server to recognize it as the same volume, you must
modify the disk ID to match the original value.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Storage tab.
3. In the Storage tab navigation pane, select the volume you want to modify.
4. In the right pane, click Edit Settings. The Edit Volume dialog box appears.
5. Click Edit Advanced Volume Settings. The Edit Advanced Volume Settings dialog box appears.
6. In the OpenVMS Unique Disk ID field, type a new disk ID.
7. Click OK to close the Edit Advanced Volume Settings dialog box, then click OK to close the Edit Volume dialog box.
104
Storage Center Administration