Administrator Guide

Locate a Disk in the Enclosure Diagram
The Hardware tab shows the location of a disk selected from the Disks tab in the right pane.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click Hardware tab.
3. In the Hardware tab navigation pane, expand the Enclosures node, then the node for a specific enclosure.
4. Click the Disks node. The right pane displays the disks in the enclosure in the Disks tab.
5. Select a disk from the Disks tab. The Disk View tab highlights the disk in the enclosure diagram.
NOTE: Storage Manager groups disks in an SC280 enclosure into drawers. If the enclosure is an SC280, you must
expand a drawer to select a disk.
View Cooling Fan Status for an Enclosure
The Cooling Fan Sensors node on the Hardware tab displays cooling fan status for the enclosure.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand the Enclosures node, then the node for a specific enclosure.
4. Select Cooling Fan Sensors. The right pane displays summary information.
Locate a Cooling Fan Sensor in the Enclosure Diagram
The Hardware tab highlights the location of a cooling fan sensor in the enclosure diagram.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand the Enclosures node, then the node for a specific enclosure.
4. Click the Cooling Fan Sensors node. The right pane lists the cooling fan sensors in that enclosure.
5. Select a cooling fan sensor from the Cooling Fans tab. The Fan View tab highlights the selected fan in the enclosure diagram.
View IO Module Status for an Enclosure
The I/O Modules node on the Hardware tab displays IO module status for the enclosure.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand the Enclosures node, then the node for a specific enclosure.
4. Click I/O Modules. The right pane displays status information for the IO module selected from the I/O Modules tab.
Locate an IO Module in the Enclosure Diagram
The Hardware tab highlights the location of an IO module in the enclosure diagram.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand the Enclosures node then, the node for a specific enclosure.
4. Select the I/O Modules node. The right pane lists the IO modules in the enclosure.
5. Select an IO module from the I/O Modules tab. The IO Module View tab highlights the selected IO module in the enclosure diagram.
Viewing Storage Center Information
313