Administrator Guide

Replication Target Volume is Detached
Description Replication between the source NAS volume and the target NAS volume fails because the target NAS volume
is detached from the source NAS volume.
Cause Replication fails because the target NAS volume was previously detached from the source NAS volume.
Workaround Perform the detach action on the source NAS volume. If required, reattach both NAS volumes in a replication
relation.
Replication Disconnection
Description Replication between the source NAS volume and the target NAS volume fails because the connection
between the source and target systems is lost.
Cause Network infrastructure connection issue between the source and the target.
Workaround Check whether the replication is automatically restored. If the replication is not automatically restored, check
the network communication between the source FluidFS cluster and the target FluidFS cluster. Network
communication can be checked by using a third-party system in the same subnet that can ping both the
source and target FluidFS clusters. Also, verify that the FluidFS replication ports are open on your firewall to
allow replication between the source and target FluidFS cluster.
Replication Incompatible Versions
Description Replication between the source NAS volume and the target NAS volume fails because the FluidFS version of
the source FluidFS cluster is higher than the FluidFS version of the target cluster.
Cause Replication fails because the FluidFS version of the source FluidFS cluster is higher than the FluidFS version
of the target FluidFS cluster.
Workaround Upgrade the FluidFS version of the target FluidFS cluster to match the FluidFS version of the source FluidFS
cluster.
Replication Internal Error
Description
Replication between the source and the target NAS volumes fails due to an internal error.
Workaround Contact technical support to resolve this issue.
Replication Target Does Not Have Enough Space
Description
Replication between the source NAS volume and target NAS volume fails because there is not enough space
in the target NAS volume.
Cause Replication fails because there is not enough space in the target NAS volume.
Workaround Increase the space of the target NAS volume.
Replication Source FluidFS Cluster is Busy
Description
Replication between the source NAS volume and the target NAS volume fails because the file system of the
source NAS volume is busy replicating other NAS volumes.
Cause Replication fails because the file system of the source NAS volume is busy replicating other NAS volumes.
Workaround The replication continues automatically when the file system releases part of the resources. Verify that the
replication automatically continues after a period of time (an hour).
Replication Source is Down
Description
Replication between the source NAS volume and the target NAS volume fails because the file system of
source NAS volume is down.
Cause The file system of the source NAS volume is down.
468 FluidFS Administration