Administrator Guide

3. Click the Replications & Live Volumes tab.
4. From the center of the Replications tab (default) navigation pane, select the Snapshots subtab.
5. Click Edit Settings.
6. Type the amount of time for the replica to remain in the PS Series Group.
7. Click OK.
Delete a PS Group Replication
Delete a PS Group replication when it is no longer needed.
Steps
1. Click the Storage view.
2. In the Storage pane, select a PS Group.
3. Click the Replications & Live Volumes tab.
4. From the Replications & Live Volumes tab navigation pane, select a PS Group to Storage Center replication.
5. Right-click on the PS Group to Storage Center replication and select Delete.
The Delete dialog box opens.
6. Select Delete Destination Volume.
7. Click OK.
Create a Replication from a Storage Center to a PS Group
Replicating volumes from a Storage Center to a PS Group is similar to replicating volumes from a Storage Center to another Storage
Center.
Prerequisites
You must configure an iSCSI connection between the PS Group and the Storage Center.
Steps
1. Click the Storage view.
2. In the Storage pane, select the Storage Center that hosts the volume you want to replicate.
3. Click the Storage tab.
4. In the Storage tab navigation tree, select the volume you want to replicate.
5. In the right pane, click Replicate Volume.
• If one or more QoS definitions exist, the Create Replication wizard appears.
• If a QoS definition has not been created, the Create Replication QoS wizard appears. Use this wizard to create a QoS definition
before you configure replication.
NOTE:
If the volume is a replication destination, Replication QoS settings are enforced. If the volume is a Live
Volume secondary, the Replication QoS settings are not enforced.
6. Select a remote storage system to which you want to replicate the volume, then click Next.
• The wizard advances to the next page.
• If iSCSI connectivity is not configured between the local and remote storage system, a dialog box appears. Click Yes to configure
iSCSI connectivity between the storage systems.
7. (Optional) Modify replication default settings.
• In the Replication Attributes area, configure options that determine how replication behaves.
• In the Destination Volume Attributes area, configure storage options for the destination volume.
8. Click Finish. The volume begins to replicate to the remote storage system.
Storage Center Replications and Live Volumes
489