Administrator Guide

Scan for Domains in Local and Trusted Forests
If domains are added or removed from the local forest, or if two-way forest trusts between the local forest and one or more remote
forests are added or removed, use the Data Collector to scan for domains.
Prerequisites
The Data Collector must be configured to authenticate users with an Active Directory directory service and Kerberos.
NOTE: Authentication attempts for Active Directory users may fail while a rescan operation is in progress.
Steps
1. Connect to the Data Collector.
a) Open a web browser.
b) Type the address of the Data Collector in the web browser using the following format:
https://data_collector_host_name_or_IP_address:3033/
c) Press Enter.
The Unisphere Central login page is displayed.
d) Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password field.
e) Click Log In.
2. If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
3. Click Data Collector.
The Data Collector view is displayed.
4. Click the Environment tab and then select the Directory Service subtab.
5. Click Rescan. A message appears to inform you that scanning succeeded or failed.
6. Click OK.
Related tasks
Troubleshoot Directory Service Discovery
Grant Access to Directory Service Users and Groups
To allow directory users to log in to Storage Manager, add directory service users and/or user groups to Storage Manager user groups.
Add Directory Groups to a Storage Manager User Group
Add a directory group to a Storage Manager user group to allow all users in the directory group to access Storage Manager. Access can
be granted to groups that belong to the domain to which the Data Collector is joined, domains in the same forest, and domains that belong
to forests for which two-way forest trusts are configured. Directory service groups are not supported for one-way trust domains.
Prerequisites
The Data Collector must be configured to authenticate users with an external directory service.
Steps
1. Connect to the Data Collector.
a) Open a web browser.
b) Type the address of the Data Collector in the web browser using the following format:
https://data_collector_host_name_or_IP_address:3033/
c) Press Enter.
The Unisphere Central login page is displayed.
d) Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password field.
e) Click Log In.
2.
If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
Storage Manager User Management
621