Administrator Guide

3. Click Data Collector.
The Data Collector view is displayed.
4. Click the Users & System tab and then select the Users & User Groups subtab.
5. Select the Storage Manager user group to which you want to add directory groups.
6. Click Add Directory User Groups.
The Add Directory User Groups dialog box opens.
7. (Multi-domain environments only) From the Domain drop-down menu, select the domain that contains the directory groups to which
you want to grant access.
8. Select each directory group that you want to add to the Storage Manager user group.
9. When you are finished, click OK. The directory groups that are associated with the Storage Manager group appear on the User
Groups subtab.
Related tasks
Configure the Data Collector to Use a Directory Service
Add a Directory User to a Storage Manager User Group
Add a directory user to a Storage Manager user group to allow the directory user to access Storage Manager. Access can be granted to
users that belong to the domain to which the Data Collector is joined, domains in the same forest, and domains that belong to forests for
which one-way or two-way trusts are configured.
Prerequisites
The Data Collector must be configured to authenticate users with an external directory service.
Steps
1. Connect to the Data Collector.
a) Open a web browser.
b) Type the address of the Data Collector in the web browser using the following format:
https://data_collector_host_name_or_IP_address:3033/
c) Press Enter.
The Unisphere Central login page is displayed.
d) Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password field.
e) Click Log In.
2.
If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
3. Click Data Collector.
The Data Collector view is displayed.
4. Click the Users & System tab and then select the Users & User Groups subtab.
5. Select the Storage Manager user group to which you want to add a directory user.
6. Click Add Directory Users.
The Add Directory Users dialog box opens.
7. In the Directory Users field, type the name of each directory user that you want to add.
• For OpenLDAP, the user name format is supported (example: user).
• For Active Directory, the following user name formats are supported:
• User name (example: user)
• User Principal Name (example: user@domain)
NOTE:
To add users that belong to a domain other than the domain for which the Data Collector is configured,
use the User Principal Name format.
8. Click Check Names to verify that the specified users exist in the directory service. A message appears.
NOTE: Checking names is not supported on domains for which a one-way trust is configured.
9. Click OK to close the message.
10. If any of the specified directory user names could not be verified, correct the names and then click Check Names again.
622
Storage Manager User Management