Administrator Guide

3. Click Data Collector.
The Data Collector view is displayed.
4. Click the Users & System tab and then select the Users & User Groups subtab.
5. Click the User Groups tab.
6. Select the Storage Manager user group to which the directory group is added.
7. Click the Users subtab.
8. Select the directory service group user for which you want to revoke access, then click Delete User. The Delete Directory User
dialog box opens.
9. Click Yes.
Disable External Directory Service Authentication
Disable external directory service authentication to prevent directory users from authenticating.
About this task
CAUTION: Disabling directory service authentication removes all directory service users and groups from Storage
Manager. If you choose to reenable directory service authentication at a later time, all directory users and user groups
must be granted access again.
Steps
1. Connect to the Data Collector.
a) Open a web browser.
b) Type the address of the Data Collector in the web browser using the following format:
https://data_collector_host_name_or_IP_address:3033/
c) Press Enter.
The Unisphere Central login page is displayed.
d) Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password field.
e) Click Log In.
2.
If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
3. Click Data Collector.
The Data Collector view is displayed.
4. Click the Environment tab and then select the Directory Service subtab.
5. Click Edit.
The Service Settings dialog box opens.
6. Clear the Enabled checkbox.
7. Click OK.
Managing Local Users Through the Data Collector
Storage Manager users and mappings to Storage Center can be configured on the Users tab on the Data Collector view.
Update the Information Displayed on the Users & System
Tab
Refresh the Users & System tab to display changes to user accounts and user/Storage Center maps.
Steps
1. In the Data Collector, click the Users tab.
2. Click Refresh. The Users & System tab reappears after the data is refreshed.
624
Storage Manager User Management