Release Notes
Fixed Issues Related to the Storage Manager User Interface
The following issues related to the Storage Manager user interface are xed in Storage Manager 2018 R1:
Table 19. Open Issues in Storage Manager 2018 R1.20
Issue Description
DSM-38128 Attempting to create an IP lter with a Specic User setting results in a error and prevents the creation
of any additional IP lters.
Documentation updated to clarify this setting.
Table 20. Issues Fixed in Storage Manager 2018 R1.10
Issue Description
DSM-38285 The Storage Summary chart displays inaccurate values for Storage Manager users with Volume
Manager or Reporter privileges.
DSM-37538 Changes to the IPv4 port addresses in the Edit Fault Domain Settings dialog box might not be saved.
Table 21. Issues Fixed in Storage Manager 2018 R1
Issue Description
DSM-32065 Storage Center volumes are showing a secured state when the disk folder is still in secure pending
state.
DSM-30615 The snapshot column in the Automated Report for the volume Storage Report contains all zeros.
DSM-24010 After updating Storage Center, Storage Manager might not show some storage statistics in the
Summary tab for a Storage Center.
DSM-20153 The Message column in the Audit Logs tab of the Monitoring view does not display messages for PS
Series groups.
DSM-15322 When exporting storage usage data with the Save size data as MB option, the output is in blocks and
must be manually converted to bytes.
DSM-14987 Storage Manager displays iSCSI ports on an SC4020 that are connected to a server but not
congured in red and in a down state.
DSM-13758 When restarting a peer controller, a blank warning dialog box appears.
DSM-12518 The Mappings tab for a volume might not include a horizontal scroll bar.
SCOS-44972 If a storage system or storage controller reset is initiated from Storage Manager, the reset might not
be recorded in Storage Center logs.
SCOS-41051 When the Storage Manager Client is connected to a Storage Center through a Data Collector, the
Storage Manager Client does not allow you to change the name of an enclosure and asset tag.
SCOS-25031 After a controller failover, the peer controller might be reported as down by both SNMP and a Storage
Manager Client that is directly connected to the peer controller.
Storage Manager 2018 R1 Release Notes 15