Install Guide

The Network page is displayed.
If the Windows server has multiple network adapters, select the adapter to use for Data Collector communication.
● To allow the installation wizard to automatically select the network adapter for the Data Collector, select the
Automatically Select Network Adapter checkbox.
● To specify the network adapter for the Data Collector, clear the Automatically Select Network Adapter checkbox and
select a network adapter from the drop-down menu.
12. Click Next.
The Summary page is displayed.
13. Verify the information on the Summary page.
14. Click Install.
15. When the migration is complete, connect to the Windows server with the existing Data Collector and stop the Storage
Manager Data Collector service.
Next Steps After Migration
Depending on the configuration of the existing Data Collector, you may need to perform some additional setup tasks.
● Configure Active Directory
● Import new SSL certificates or generate new SSL certificates using the new IP address or fully qualified domain name
(FQDN) of the Data Collector.
To generate new SSL certificates:
1. Go to Data Collector > General > Security and click Generate Certificate.
The Generate Certificate dialog box is displayed.
2. Select the type of certificate to generate from the Certificate type drop-down menu.
The options are:
○ All certificates - Generates Data Collector and VASA Provider certificates.
○ DSM Server - Generates Data Collector certificates.
○ VASA Server - Generates VASA Provider certificates.
3. Select the new IP address or FQDN of the Data Collector from the Certificate Subject drop-down menu.
4. If you are regenerating a VASA Provider certificate, type the username and password of a Data Collector user with
Administrator privileges in the DSM User Name and Password fields.
5. Click OK.
The Data Collector is restarted new certificates are generated with new IP address or FQDN of the Data Collector.
18
Installing and Configuring the Data Collector