Administrator Guide

Filter the Data Collector Alerts
The Alerts view displays all unacknowledged Storage Center alerts by default. Click the Data Collector tab to view Data Collector alerts.
Steps
1.
If you are connected to a Data Collector and a Storage Center is selected from the drop-down list, click (Home) in the left
navigation pane of Unisphere Central.
2. From the MONITORING menu, click Alerts.
The Alerts view is displayed.
3. Click the Data Collector tab from the Alerts view.
4. Click (Column Filters).
The Filters dialog box opens.
5. Select one or more of the following filter categories:
• Severity
• Last Occurrence
• Date & Time
• Message
• Type
6. Select one or more filter values for the selected categories.
7. Click Apply.
8. Click X to close the Filters dialog box.
Select the Date Range of Data Collector Alerts to Display
You can view Data Collector alerts for a specific time period.
Steps
1.
If you are connected to a Data Collector and a Storage Center is selected from the drop-down list, click (Home) in the left
navigation pane of Unisphere Central.
2. From the MONITORING menu, click Alerts.
The Alerts view is displayed.
3. Click the Data Collector tab from the Alerts view.
4.
Click (Column Filters).
The Filters dialog box opens.
5. Specify a start date and time in the Last Occurrence field.
a) Click the calendar icon and select a start date from the calendar.
b) Click the clock icon and select a start time from the drop-down list.
6. Specify an end date and time in the Last Occurrence field.
a) Click the calendar icon and select a end date from the calendar.
b) Click the clock icon and select a end time from the drop-down list.
7. Click Apply.
8. Click X to close the Filters dialog box.
Configuring Email Alerts for Unisphere Central Events
Unisphere Central can be configured to send automated reports when monitored events occur.
About this task
To configure Unisphere Central to send automated reports by email:
Storage Center Monitoring
187