Administrator Guide

4. Select (More Actions) and select Set Snapshot Profiles.
The Set Snapshot Profiles dialog box opens.
5. Select the snapshot profiles to apply to the volume.
6. Click OK.
Assign Snapshot Profiles to Multiple Volumes
Snapshot profiles can be assigned to multiple volumes in one operation.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere
Central.
2.
From the STORAGE menu, click Volumes.
The Volumes view is displayed.
3. In the Volumes view, select the volumes you want to modify.
• To select contiguous volumes, select the first volume, then hold down Shift and select the last volume.
• To select individual volumes, hold down Control while selecting them.
4. Click (More Actions) and select Set Snapshot Profiles.
The Set Snapshot Profiles dialog box opens.
5. Select each snapshot profile you want to assign to the volumes.
6. To remove the snapshot profiles that were previously assigned to the volume, select Replace Existing Snapshot Profiles .
7. Click OK.
Assign a Different Storage Profile to a Volume
The storage profile determines the RAID type and storage tiers used by the volume.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere
Central.
2.
From the STORAGE menu, click Volumes.
The Volumes view is displayed.
3. In the Volumes view, select the volume you want to modify.
4. Click (More Actions) and select Set Storage Profile.
The Set Storage Profile dialog box opens.
5. From the Storage Profile drop-down menu, select a storage profile.
6. Click OK.
Assign a Different Storage Profile to Multiple Volumes
The storage profile determines the RAID type and storage tiers used by the volume. A storage profile can be assigned to multiple volumes
in one operation.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere
Central.
2.
From the STORAGE menu, click Volumes.
The Volumes view is displayed.
3. In the Volumes view, select the volumes you want to modify.
• To select contiguous volumes, select the first volume, then hold down Shift and select the last volume.
• To select individual volumes, hold down Control while selecting them.
4. Click (More Actions) and select Set Storage Profile.
The Set Storage Profile dialog box opens.
5. From the Storage Profile drop-down menu, select a storage profile.
Storage Center Administration
49