Manualshelf

Administrator Guide

ManualsBrandsDell ManualsStorageDell Compellent FS8600
201202203204205206207208209210
Table Of Contents
8. In the Password field, type a password (otherwise known as a CHAP secret).
9. To enable the local CHAP account, select the Enable checkbox.
To disable the local CHAP account, clear the Enable checkbox.
10. Click OK.
Modify Target Authentication
A PS Series group automatically enables target authentication using a default user name and password. If needed, you can
change these credentials.
Steps
1. Click the Storage view.
2. In the Storage pane, select a PS Series group.
3. Click the Storage tab.
4. In the Storage tab navigation pane, select the Access node.
5. In the right pane, click Modify Target Authentication. The Modify Target Authentication dialog box opens.
6. In the Username field, type a target authentication user name.
7. In the Password field, type a target authentication password (otherwise known as a CHAP secret).
8. Click OK.
Set the iSCSI Discovery Filter
You can prevent computers from discovering unauthorized targets by enabling the iSCSI discovery filter. If you enable the iSCSI
discovery filter, initiators discover only those targets for which they have the correct access credentials.
Steps
1. Click the Storage view.
2. In the Storage pane, select a PS Series group.
3. Click the Storage tab.
4. In the Storage tab navigation pane, select the Access node.
5. In the right pane, click Set iSCSI Filter. The Set iSCSI Filter dialog box opens.
6. To enable the iSCSI discovery filter, select the Prevent unauthorized host from discovery targets checkbox.
To disable the iSCSI discovery filter, clear the Prevent unauthorized host from discovery targets checkbox.
7. Click OK.
Create an Access Policy Group
Access policy groups combine individual access policies together so that they can be managed as a single entity.
Steps
1. Click the Storage view.
2. In the Storage pane, select a PS Series group.
3. Click the Storage tab.
4. In the Storage tab navigation pane, select the Access node.
5. In the right pane, click Create Access Policy Group. The Create Access Policy Group dialog box opens.
6. In the Name field, type a name for the access policy group.
7. (Optional) In the Description field, type a description for the access policy group.
8. In the Access Policies area, click Add to add access policies to the access policy group.
To remove an access policy from the access policy group, select the access policy and click Remove.
9. Click OK.
PS Series Storage Array Administration
207