Administrator Guide

Apply Secure Console Settings to Multiple Storage Centers
Secure Console settings that are assigned to a single Storage Center can be applied to other Storage Centers.
Prerequisites
The Storage Center must be added to Storage Manager using a Storage Center user with the Administrator privilege.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. In the Summary tab, click Edit Settings.
The Edit Storage Center Settings dialog box opens.
3. Click the Secure Console tab.
4. Select the Apply these settings to other Storage Centers checkbox.
5. Click Apply.
The Select Storage Center dialog box opens.
6. Select the checkbox for each Storage Center to which you want to apply the settings.
7. Click OK.
● If the Secure Console proxy password is not configured or was modified, the dialog box closes.
● If the Secure Console proxy password was configured previously and not modified, the Secure Console Proxy password
dialog box opens.
8. (Proxy password only) In the Password field, type the password for the proxy, then click OK.
Configuring Storage Center SMTP Settings
SMTP server settings can be configured individually for each Storage Center or applied to multiple Storage Centers.
NOTE: For user interface reference information, click Help.
Configure Storage Center SMTP Server Settings
Configure SMTP settings to allow the Storage Center to send alert message emails to users who have specified a recipient
address in their contact properties.
Prerequisites
The Storage Center must be added to Storage Manager using a Storage Center user with the Administrator privilege.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. In the Summary tab, click Edit Settings.
The Edit Storage Center Settings dialog box opens.
3. Click the SMTP Server tab.
4. Configure the SMTP server settings.
a. Select the Enable SMTP Email check box.
b. In the SMTP Mail Server field, type the IP address or fully qualified domain name of the SMTP email server.
c. (Optional) In the Backup SMTP Server field, type the IP address or fully qualified domain name of a backup SMTP email
server.
d. Click OK.
e. Open the SMTP Server tab and click Test Server to verify connectivity to the SMTP server.
f. If the SMTP server requires emails to contain a MAIL FROM address, specify an email address in the Sender Email
Address field.
g. (Optional) In the Common Subject Line field, type a subject line to use for all emails sent by the Storage Center.
h. Configure how the Storage Center identifies itself to the SMTP server:
● To use SMTP, type the Storage Center fully qualified domain name in the Hello Message (HELO) field.
224
Storage Center Maintenance