Administrator Guide

5. Select the Storage Center user or user privilege level to allow.
● To allow access to a Storage Center user privilege level, select User Privilege Level, then select a privilege level from
the drop-down menu.
● To allow access to an individual Storage Center user, select Specific User, then select a user from the drop-down menu.
6. Specify which source IP addresses to allow.
NOTE: If network address translation (NAT) is enabled in your network environment, be sure to specify the IP
address(es) visible to the Storage Center.
● To allow all source IP addresses, select All Hosts.
● To allow access to a specific IP address, select Single IP Address, then type the IP address in the field.
●
To allow access to a range of IP addresses, select Range of IP Addresses, then type the first and last IP addresses in
the fields.
7. Click OK.
Modify an Access Filter for a Storage Center
Modify an access filter to change the users or IP addresses it allows.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. In the Summary tab, click Edit Settings.
The Edit Storage Center Settings dialog box opens.
3. Click the IP Filtering tab.
4. Select the access filter that you want to modify, then click Modify Filter.
The Modify IP Filter dialog box opens.
5. Modify the access filter settings as needed. For user interface reference information, click Help.
6. (Optional) Modify the allowed Storage Center user or user privilege level.
● To allow access to a Storage Center user privilege level, select User Privilege Level, then select a privilege level from
the drop-down menu.
● To allow access to an individual Storage Center user, select Specific User, then select a user from the drop-down menu.
7. (Optional) Modify the allowed source IP addresses.
NOTE:
If network address translation (NAT) is enabled in your network environment, be sure to specify the IP
address(es) visible to the Storage Center.
● To allow all source IP addresses, select All Hosts.
● To allow access to a specific IP address, select Single IP Address, then type the IP address in the field.
● To allow access to a range of IP addresses, select Range of IP Addresses, then type the first and last IP addresses in
the fields.
8. Click OK.
Delete an Access Filter for a Storage Center
Delete an access filter if it is no longer needed or you want to revoke administrative access to the users and IP addresses that
the filter matches.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. In the Summary tab, click Edit Settings.
The Edit Storage Center Settings dialog box opens.
3. Click the IP Filtering tab.
4. Select the access filter that you want to delete, then click Delete Filter.
The Delete IP Filter dialog box opens.
5. Click OK to confirm.
6. Click OK.
228
Storage Center Maintenance