Administrator Guide

Change the Client VIPs for a Client Network
Change the client VIPs through which clients will access SMB shares and NFS exports.
Steps
1. Click the Storage view and select a FluidFS cluster.
2. Click the File System tab.
3. In the File System tab navigation pane, expand Tenants and select a tenant.
4. Select Client Accessibility.
5. In the right pane, select the DNS and Public IPs tab. In the Public IPs pane, click Edit Settings. The Edit Public IPs
Settings dialog box appears.
6. To add a client VIP:
a. In the VIP area, enter a client virtual IP address in the box next to Add, and then click Add.
b. Click OK.
7. To remove a client VIP:
a. Select a client VIP.
b. Click Remove.
NOTE: A client network must have at least one client VIP.
8. Click OK.
Change the NAS Controller IP Addresses for a Client Network
Change the NAS controller IP addresses for a client network.
Steps
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, select Cluster Connectivity.
4. Click the Client Network tab.
5. In the Client Network panel, click Edit Settings. The Edit Client Network Settings dialog box opens.
6. In the NAS Controllers IP Addresses field, select a NAS controller and then click Edit Settings. The Edit Controller IP
Address dialog box opens.
7. In the IP Address field, type an IP address for the NAS controller.
8. Click OK.
Delete a Client Network
Delete a client network if clients no longer need to access SMB shares and NFS exports on that network. You cannot delete the
Primary subnet.
Steps
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, select Cluster Connectivity.
4. Click the Client Network tab.
5. In the Client Network panel, select a client network and then click Delete. The Delete dialog box opens.
6. Click OK.
362
FluidFS Administration