Manualshelf

Administrator Guide

ManualsBrandsDell ManualsStorageDell Compellent FS8600
411412413414415416417418419420
Table Of Contents
Displaying Security Audit Events
Storage Manager displays a centralized view of the security audit events generated in volumes where SACL events are
configured.
Steps
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab and select Client Activity.
3. Click the SACL Auditing Events tab.
4. In the Events panel, select which security audit events that you want to display.
Audit SACL Access
Set Audit SACL (System Access Control List) Access to enable the type of auditing to be performed when an object (a file or
directory with SACL entries) is accessed. If SACL access is not enabled for a NAS volume, then even if a file or directory has
SACL entries, the access does not generate an auditing event. Generated events for a NAS volume can be limited to successes,
failures, or both.
Steps
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, expand NAS Volumes and select a NAS volume.
4. In the NAS Volumes panel, click Edit Settings.
The Edit NAS Volume Settings dialog box opens.
5. Click Data protection.
6. In the SACL Audit on File Access Events area, select On Success, On Failure, or both.
7. Click OK.
View Audit SACL Access
You can view SACL (System Access Control List) access to ensure that an auditing event is generated when a file or directory is
accessed. To view Audit SACL Access:
Steps
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, expand NAS Volumes and select a NAS volume.
4. In the NAS Volumes panel, click Edit Settings.
The Edit NAS Volume Settings dialog box opens.
5. Click the Data Protection tab.
The Auditing panel displays the SACL access settings for the volume.
FluidFS Administration
415