Deployment Guide
Figure 7. Multi-Appliance Fibre Channel 10GbE Cluster Conguration With an SCv2080 Storage System
1.
Client network 2. Internal network
3. Fibre Channel SAN switch 4. SCv2080 with 10Gb FC ports
5. Client network connections 6. Internal network connections
7. Storage Center fault domain 1 connections 8. Storage Center fault domain 2 connections
Congure Network Connections for 10GbE iSCSI Appliances
Connect 10GbE iSCSI appliances to the SAN/internal network and client network.
Connect 10GbE FS8600 iSCSI Appliances
Connect the FS8600 appliances to the SAN/internal network and client network.
Prerequisites
• LC optical ber and/or twinax cables must be available. See Materials.
• The SAN network must meet conguration requirements. See SAN and Internal Networks for iSCSI Appliances.
• The client network must meet conguration requirements. See Client Network.
Steps
1. Identify the ports on a 10GbE iSCSI FS8600 appliance.
Install and Connect the FS8600 Hardware
21