Deployment Guide
Steps
1. Click the Storage view and select a FluidFS cluster.
2. In the File System view, select Cluster Connectivity, and click the Client Network tab.
3. In the Static Route panel, click Congure Default Gateway.
The Congure Default Gateway dialog box opens.
4. In the Default IPvn Gateway eld, type a new default gateway IP address.
To provide a default gateway for IPv4 and IPv6 addresses, you need a client subnet of the appropriate type that contains the
default gateway.
5. Click OK.
Congure DNS Settings
Specify IP addresses for DNS servers and DNS suxes for the network.
About this task
Use this page of the Add FluidFS Cluster wizard to congure the DNS settings of the FluidFS cluster.
Figure 18. Add FluidFS Cluster Wizard — Congure DNS Settings Page
Steps
1. (Optional) To skip DNS conguration, select the Skip DNS Conguration checkbox and click Next.
The Congure Time Settings page opens. See Congure Time Settings.
2. In the DNS Servers IP Addresses area, specify DNS servers that the FluidFS cluster should use for name resolution.
• To dene a DNS server, type the server IP address in the eld, then click Add.
• To remove a DNS server, select the server IP address, then click Remove.
• To increase or decrease the order of preference for a DNS server, select the server IP address, then click Up or Down.
3. In the DNS Suxes area, specify DNS suxes that the FluidFS cluster should use for name resolution.
• To dene a DNS sux, type the sux in the eld, then click Add.
• To remove a DNS sux, select the sux, then click Remove.
• To increase or decrease the order of preference for a DNS sux, select the sux, then click Up or Down.
4. Click Next.
The Congure Time Settings page opens.
Congure Time Settings
Congure the time zone for the FluidFS cluster. The cluster can also be congured to synchronize time settings with NTP (Network
Time Protocol) servers.
About this task
Use this page of the Add FluidFS Cluster wizard to congure the time settings of the FluidFS cluster.
32
Congure the FluidFS Cluster