Deployment Guide

Verify Fibre Channel Connectivity
Use the Connectivity Report page to verify that each FluidFS Fibre Channel port has connectivity to the Storage Centers.
About this task
Use this page of the Add FluidFS Cluster wizard to verify Fibre Channel connectivity to Storage Centers.
Figure 22. Add FluidFS Cluster Wizard — Verify Fibre Channel Connectivity Page
Steps
1. Click Refresh.
• If zoning is congured correctly, the status for each port changes to Up.
• If zoning is congured incorrectly, the status for one or more HBAs remains Down. If this status is displayed, verify that the
zoning conguration is correct.
2. Click Next.
The Congure NAS Pool page opens. See Finalize FluidFS Cluster Conguration.
Congure iSCSI SAN Connectivity
Select Storage Center fault domains, congure FluidFS cluster iSCSI HBAs, and verify iSCSI connectivity.
Select iSCSI Fault Domains
Use the Select iSCSI Fault Domains page to select a Storage Center iSCSI control port for each connected iSCSI subnet (Storage
Center fault domain).
About this task
Use this page of the Add FluidFS Cluster wizard to the select iSCSI fault domains.
NOTE: The default number of le system domains (FSDs) is suitable for the vast majority of situations, and cannot be
reverted if it is changed. Do not change the default FSDs without consulting Dell-EMC support.
Congure the FluidFS Cluster
35