Reference Guide

networking client-load-balancing mass-rebalance
Rebalance all the clients between the NAS controllers.
NOTE: Clients that are moved between controllers will experience a brief disconnection.
Format
networking client-load-balancing mass-rebalance
networking client-load-balancing move
Move a client or router to a required NAS controller.
Format
networking client-load-balancing move <ClientIP> <AccessIP> <ControllerID>
Arguments
Argument Description Format
<ClientIP> Client or router IP address Existing client or router IP
address in IPv6 or IPv4 format
<AccessIP> Client VIP to which the client or
router was accessed
Existing client VIP IP address in
IPv6 or IPv4 format
<ControllerID> ID of the NAS controller to which
to move the client
Existing NAS controller ID
Example
Move a client with the IP address 172.22.69.18 using client VIP 172.22.69.32 to controller 1:
CLI> networking client-load-balancing move 172.22.69.18 172.22.69.32 1
networking client-load-balancing pin
Pin a client or router to an assigned NAS controller.
Format
networking client-load-balancing pin <ClientIP> <AccessIP> <ControllerID>
{options}
188
CLI Commands