Reference Guide

Options
Option Description Format
-SanVIP <SanVIP> San VIP which will be used to
communicate with the cluster
Example
Add a fabric named FAB1 on the eth30 interface where the netmask is 255.255.255.0:
CLI> hardware fabrics add FAB1 eth30 255.255.0.0
hardware fabrics fc list
Display a list of the Fibre Channel fabrics.
NOTE: This command is available only on 10GbE iSCSI FS8600 appliances.
Format
hardware fabrics fc list
Example
Display a current list of the Fibre Channel fabrics:
CLI> hardware fabrics fc list
Output
.------.-----------.
| Name | Interface |
|------|-----------|
| SANa | hba0 |
|------|-----------|
| SANb | hba1 |
'------'-----------'
hardware fabrics fc view
Display details of a Fibre Channel fabric.
NOTE: This command is available only on Fibre Channel with 1GbE or 10GbE FS8600 appliances.
Format
hardware fabrics fc view <Name>
CLI Commands
57