Install Guide
Table Of Contents
- About This Guide
- Storage Manager 2018 R1 Installation Guide
- Contents
- Introduction to Storage Manager
- Planning and Preparation
- Installing and Configuring the Data Collector
- Installing and Configuring the Storage Manager Virtual Appliance
- Installing and Configuring the Storage Manager Client
- Updating Storage Manager Software
To specify a different port number for the VASA service, type the port number in the Enable VASA Service Port field.
d. To enable the SMI-S service, select the Enable SMI-S Service Port checkbox and type a port number for the service in
the field.
To specify a different port number for the SMI-S service, type the port number in the Enable SMI-S Service Port field.
11. Click Next.
The Network page is displayed.
If the Windows server has multiple network adapters, select the adapter to use for Data Collector communication.
● To allow the installation wizard to automatically select the network adapter for the Data Collector, select the
Automatically Select Network Adapter checkbox.
● To specify the network adapter for the Data Collector, clear the Automatically Select Network Adapter checkbox and
select a network adapter from the drop-down menu.
12. Click Next.
The Summary page is displayed.
13. Verify the information on the Summary page.
14. Click Install.
15. When the migration is complete, connect to the Windows server with the existing Data Collector and stop the Storage
Manager Data Collector service.
Installing and Configuring the Data Collector 21