Release Notes

Drive Firmware Updates in SCOS Versions 6.7
The following table lists the drive rmware updates for these software releases. These updates represent Dell’s latest qualication
versions, and are general rmware updates (including ongoing improvements) unless otherwise noted in the comments.
NOTE: SCOS version 6.6.x and later support plug-and-play discovery for most new drive introductions. Drive rmware
package updates are not needed to accept new drives. Plug-and-play discovery support for 4K sector drives ( 8 TB and
10 TB) requires SCOS version 7.1.1 or later.
Product ID (SAS Drives)
Existing Firmware
Version
New Firmware
Version
Priority Comments
ST300MP0006
n/a KL34 Optional New drive model
ST600MP0006
ST600MP0026 n/a KPC4 Optional New drive model
MZIES800HMHP
CQSH CQSI Recommended Ongoing product improvements
MZIES1T6HMJH
HUC101860CSS204
FE18 FE31 Recommended Ongoing product improvementsHUC101890CSS204
HUC101812CSS204
HUC101818CS4204 prepopulated FF31 Recommended Ongoing product improvements
HUC156030CSS204
EE18 EE31 Recommended Ongoing product improvements
HUC156060CSS204
ST1000NM0001
PE0D PE0F Recommended Ongoing product improvements
ST2000NM0001
ST32000645SS
RE12 RE13 Recommended Ongoing product improvements
ST33000650SS
ST9600205SS
CE0D CE0E Recommended Ongoing product improvements
ST9900805SS
HUS726060AL5214 prepopulated KF31 Recommended Ongoing product improvements
HUS726020ALS214
prepopulated KE31 Recommended Ongoing product improvements
HUS726040ALS214
Storage Center Drive Firmware Update – Q3 CY 2017
3