User manual

Installing the Hard-Drive Assembly

1. Replace the hard drive into the hard-drive bracket.

2. Install the screws that secure the hard-drive bracket.

3. Install the hard-drive assembly into its slot on the computer.

4. Install the screws that secure the hard-drive assembly to the computer.

5. Connect the SATA cable and the power cable to the hard-drive assembly.

6. Install the:

• bezel

• cover

7. Follow the procedures in After Working Inside Your Computer.

Removing the Optical Drive

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove the:

• cover

• bezel

3. Follow the steps to remove the optical drive:

a. Disconnect the data cable [1] and power cable [2] from the optical drive.

b. Remove the screws that secure the optical drive [3].

c. Slide the optical drive from the drive bay to remove it from the computer [4].