User's Manual

TroubleshootingtheCardReader
Back to Contents Page
l Troubleshoot the computer's sound card.
l Test the Soundbar using another audio source (For example: portable CD player, MP3
player).
Low Volume
Volume is too low
l Clear any obstructions between the Soundbar and the user.
l Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume
setting.
l Set all Windows volume controls to their maximum.
l Increase the volume of the audio application.
l Test the Soundbar using another audio source (For example: portable CD player, MP3
player).
NOTICE: Do not remove the media while the Card reader is reading or writing to the media. Doing so may cause loss of data or
malfunction in the media.

Common Symptoms
What You Experience
Possible Solutions
Drive letter is not assigned
(Microsoft Windows XP
™
only)
Conflict with network drive letter
A. Right-click My Computer on the desktop, and then click Manage. Under
Computer Management, click Disk Management.
B. In the list of drives in the right panel, right-click Removable Device and then
click Change Drive Letter and Paths.
C. Click Change, and in the drop-down box, specify a drive letter for the
Removable Device, choose one that is not assigned to a mapped network
drive.
D. Click OK, and then click OK again.
Drive letter is assigned, but
the media is not accessible

The media needs reformatting
l Right-click the drive in Explorer and choose Format from the resulting menu.
NOTICE: Formatting the media erases the contents.
l Test the card reader using another media or test the media on another card
reader to ensure the media is not defective.
The media is removed during
writing or erasing.
Computer prompts this error
message during erasing.
Error copying file or folder
OR
Cannot write folder (folder name) or
file (file name), during writing, or,
Cannot remove folder (folder name)
or file (file name)
l Reinsert the media and write or erase again.
l While erasing, you cannot write or erase in the same folder or file name.
l The media may be corrupted, format the media and try again.
NOTICE: Formatting the media erases the contents.
The media is removed while
the LED is still blinking
although the write/delete
status window has
disappeared.

Although the write/delete status
window disappears, the
writing/deleting action on the media
may not have been completed if the
LED is blinking.
l Reinsert the media and write or erase again.
l The media may be corrupted, format the media and try again.
NOTICE: Formatting the media erases the contents.
Cannot format or write on the
media.
Write-protect switch is enabled
Verifythatthewrite-protect switch of the media is unlocked.
