Deployment Guide
Table Of Contents
- Dell Security Management Server Installation and Migration Guide v11.1.1
- Contents
- Introduction
- Requirements and Architecture
- Pre-Installation Configuration
- Install or Upgrade/Migrate
- Post-Installation Configuration
- Administrative Tasks
- Ports
- SQL Server Best Practices
- Certificates
Hardware
The following table details the minimum hardware requirements for Security Management Server see Security Management
Server Architecture Design for additional information about scaling based on the size of your deployment.
Hardware Requirements
Processor
Modern Quad-Core CPU (1.5 GHz+)
RAM
16GB
Free Disk Space
20GB of free disk space
NOTE: Up to 10GB may be consumed for a local event database stored within PostgreSQL
Network Card
10/100/1000 or better
Miscellaneous
IPv4 or IPv6 or Hybrid IPv4/IPv6 environment required
The following table details the minimum hardware requirements for a Security Management Server Front - End / Proxy Server.
Hardware Requirements
Processor
Modern Dual-Core CPU
RAM
8GB
Free Disk Space
20GB of free disk space for log files
Network Card
10/100/1000 or better
Miscellaneous
IPv4 or IPv6 or Hybrid IPv4/IPv6 environment required
Virtualization
The Security Management Server can be installed in a virtual environment. Only the following environments are recommended.
Security Management Server v11.0.0 has been validated on the following platforms.
Hyper-V Server installed as a Full or Core installation or as a role in Windows Server 2012, Windows Server 2016, or Windows
Server 2019.
● Hyper-V Server
○ 64-bit x86 CPU required
○ Host computer with at least two cores
○ 8 GB RAM minimum recommended
8
Requirements and Architecture