User's Manual

System information
Table 27. System Configuration
Option Description
Integrated NIC Allows you to control the onboard LAN controller. The option ‘Enable UEFI Network Stack’ is not
selected by default. The options are:
Disabled
Enabled
Enabled w/PXE (default)
NOTE: Depending on the computer and its installed devices, the items that are listed
in this section may or may not appear.
SATA Operation Allows you to configure the operating mode of the integrated hard drive controller.
Disabled = The SATA controllers are hidden
AHCI = SATA is configured for AHCI mode
RAID ON = SATA is configured to support RAID mode (selected by default)
Drives Allows you to enable or disable the various drives onboard:
SATA-0 (enabled by default)
M.2 PCIe SSD-0 (enabled by default)
Smart Reporting This field controls whether hard-drive errors for integrated drives are reported during system
startup. The Enable Smart Reporting option is disabled by default.
USB Configuration Allows you to enable or disable the integrated USB controller for:
Enable USB Boot Support
Enable Front USB Ports
Enable Rear USB Ports
All the options are enabled by default.
Front USB Configuration Allows you to enable or disable the front USB ports. All the ports are enabled by default.
Rear USB Configuration Allows you to enable or disable the back USB ports. All the ports are enabled by default.
USB PowerShare This option allows you to charge the external devices, such as mobile phones, music player. This
option is disabled by default.
Audio Allows you to enable or disable the integrated audio controller. The option Enable Audio is selected
by default.
Enable Microphone
Enable Internal Speaker
Both the options are selected by default.
Dust Filter Maintenance Allows you to enable or disable BIOS messages for maintaining the optional dust filter that is installed
in your computer. BIOS will generate a pre-boot reminder to clean or replace the dust filter based on
the interval set. The option Disabled is selected by default.
Disabled
15 days
30 days
60 days
90 days
120 days
150 days
180 days
28 System setup