User's Manual

Table 33. Power Management (continued)
Option Description
This option is Disabled by default.
Block Sleep Allows you to block entering to sleep (S3 state) in OS environment. This option is disabled by
default.
Post behavior
Table 34. POST Behavior
Option Description
Adapter Warnings This option lets you choose whether the system displays warning messages when you use certain
power adapters. This option is enabled by default.
Numlock LED Allows you to enable or disable the Numlock feature when your computer starts. This option is
enabled by default.
Keyboard Errors Allows you to enable or disable the keyboard error reporting when the computer starts. The option
Enable Keyboard Error Detection is enabled by default.
Fast Boot This option can speed up the boot process by bypassing some compatibility steps:
• Minimal — The system boots quickly, unless the BIOS has been updated, memory changed, or
the previous POST did not complete.
• Thorough — The system does not skip any steps in the boot process.
• Auto — This allows the operating system to control this setting (this works only when the
operating system supports Simple Boot Flag).
This option is set to Thorough by default.
Extend BIOS POST Time This option creates an additional pre-boot delay.
• 0 seconds (default)
• 5 seconds
• 10 seconds
Full Screen Logo This option will display full screen logo if your image match screen resolution. The option Enable Full
Screen Logo is not set by default.
Warnings and Errors This option causes the boot process to only pause when warning or errors are detected. Choose any
one of the option:
• Prompt on Warnings and Errors - default
• Continue on Warnings
• Continue on Warnings and Errors
Manageability
Option
Description
Intel AMT
Capability
Allows you to provision AMT and MEB Hotkey function is enabled, during the system boot.
• Disabled
• Enabled
• Restrict MEBx Access - by default
USB Provision When enabled Intel AMT can be provisioned using the local provisioning file using a USB storage device.
• Enable USB Provision - disabled by default
MEBx Hotkey Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.
• Enable MEBx hotkey—disabled by default
System setup 33