User`s guide

20 WebBIOS Configuration Utility
www. del l .c om | s upp ort .d el l. c om
Logical Drive Definition
The Logical Drive Definition screen displays for Step 4/5. Click a logical
drive to display the following screen for that drive. Use this screen to
configure the logical drive:
Logical Drive Definition Screen
Perform the following steps to configure logical drive policies.
1 Click the down arrow the box to the right of the RAID Level field to
display the possible RAID levels for the logical drive.
2 Select a RAID level.
NOTE: Only applicable
RAID levels can be
chosen. For example, if
there are two drives, you
cannot select RAID 5,
which requires a
minimum of three drives.
3 Select the Stripe Size.
The Stripe Size specifies the size of the segment written to each disk
in a RAID 1, 5, 10, or 50 logical drive. You can set the stripe size to 2
KB, 4 KB, 8 KB, 16 KB, 32 KB, 64 KB, or 128 KB. The default is 64
KB.