White Paper

15 Dell Power Edge M1000e Chassis Management Controller Version 4.5 - Extended Power Performance Using 3000W
AC PSU
0 = EPP is Disabled
2.2.3 EPP Feature Status
To view the EPP feature status use the racadm getpbinfo command. The following are examples of the
EPP status information displayed:
• Example 1
$ racadm getpbinfo
Extended Power Performance(EPP) Status = Enabled (inactive)
Available Power in EPP Pool = 3167 W (10806 BTU/h)
Used Power in EPP Pool = 0 W (0 BTU/h)
EPP Percent - Available = 100.0
• Example 2
$ racadm getpbinfo
Extended Power Performance(EPP) Status = Enabled (active)
Available Power in EPP Pool = 1698 W (5793 BTU/h)
Used Power in EPP Pool = 1468 W (5009 BTU/h)
EPP Percent - Available = 53.0
2.2.4 EPP Error Reporting
To view the EPP feature related errors use the racadm getpbinfo command. The following are examples
of the EPP feature related errors displayed:
• Example 1
$ racadm getpbinfo
Extended Power Performance(EPP) Status = Enabled (unsupported)
Available Power in EPP Pool = 0 W (0 BTU/h)
Used Power in EPP Pool = 0 W (0 BTU/h)
EPP Percent - Available = 0.0
EPP Error Messages
The feature is not supported while Max Power Conservation Mode is enabled.
• Example 2
$ racadm getpbinfo