White Paper

16 Dell Power Edge M1000e Chassis Management Controller Version 4.5 - Extended Power Performance Using 3000W
AC PSU
Extended Power Performance(EPP) Status = Enabled (unsupported)
Available Power in EPP Pool = 0 W (0 BTU/h)
Used Power in EPP Pool = 0 W (0 BTU/h)
EPP Percent - Available = 0.0
EPP Error Messages
The feature is not supported with an unsupported PSU : PSU Slot 1.
The feature is not supported with an unsupported PSU : PSU Slot 2.
The feature is not supported with an unsupported PSU : PSU Slot 3.
The feature is not supported with an unsupported PSU : PSU Slot 4.
The feature is not supported with an unsupported PSU : PSU Slot 5.
The feature is not supported with an unsupported PSU : PSU Slot 6.
2.2.5 EPP Log Messages and RAC Log
The EPP feature enable or disable control operations performed using the RACADM interface are captured
in the RAC logs.
To view the EPP feature control related logs, use the racadm getraclog command:
$ racadm getraclog
Jul 31 14:16:11 CMC-4C2WXF1 Log Cleared
Jul 31 14:15:49 CMC-4C2WXF1 Extended Power Performance is Enabled
Jul 31 14:15:49 CMC-4C2WXF1 Extended Power Performance is Disabled