Setup Guide

6 Storage Center System Setup Guide

Setting Up the Storage Center

Configuring a System via the Startup Wizard

After establishing a connection to Controller 1, use the Storage Center Startup Wizard for

the remainder of the setup. The Startup Wizard takes you through the following steps:

Step 1: Launch the Storage Center Startup Wizard on page 6

Step 2: License Agreement on page 7

Step 3: Load License on page 7

Step 4: Create Disk Folder on page 8

Step 5: Add Controller (dual-controller systems only) on page 13

Step 6: Time Settings on page 16

Step 7: System Setup on page 17

Step 8: Configure SMTP on page 18

Step 9: Update Setup on page 21

Step 10: User Setup on page 22

Step 11: Configure IO Cards (optional) on page 23

Step 12: Configure Ports on page 24

Step 13: Generate SSL Certificate on page 43

Step 1: Launch the Storage Center Startup Wizard

Note The Storage Center System Manager cannot load with the following unique

combination of applications: Windows 2008 (64 bit), FireFox 3.0, and Java Runtime

Environment 6_10.

 To launch the Startup Wizard

1 Open a browser on a workstation or PC with an Ethernet connection to the controller.

The following browsers are supported:

• Microsoft Windows Internet Explorer Versions 7, 8, and 9

• Mozilla Firefox Version 3 on Microsoft Windows

2 Enter the eth0 IP address of Controller 1.

3 Click Yes to acknowledge the security alert.

Note Depending on your browser settings and Java version, additional security alerts

may appear.

4 Agree to any security alerts that are displayed by clicking Yes. The Storage Center login

window appears.