Setup Guide

9
Configuring a System via the Startup Wizard
Select Disks for the Disk Folder
To maximize the benefit of Data Progression, the Startup Wizard selects all available disks.
Figure 3. Select Disks for Disk Folder
1 From the list of disks, check disks to include in the disk folder. By default, all disks are
selected. If desired, change the selection by un-checking individual disks, or by clicking
Unselect All and then checking the individual disks that you want to include. To select
all disks again, click Select All.
2 Click Continue. A dialog appears allowing you to select Hot Spares.