User's Manual

170 Storage Center 5.5 System Manager User Guide
Controllers
Figure 140. iSCSI IO Card Properties
3 The window displays:
Type: iSCSI
Description
Status: Up or Down
WWN
User Alias
IP Address, Subnet Mask, Gateway IP Address
Maximum Transmission Unit: Standard or Jumbo Frames (Refer to Enabling
Jumbo Frames on page 171.)
Enable or clear VLAN taggings. (Refer to Enabling VLAN Tagging on page 171.)
To set a user alias
To enter a user alias, in the IO Card General Properties window, enter a user alias or click
Reset User Alias.
To add an iSCSI card
To add an IO card to your system, in the IO Card General Properties window, enter an IP
address, Subnet mask, or Gateway IP address.