User's Manual

178 Storage Center 5.5 System Manager User Guide
Controllers
Figure 146. Virtual iSCSI Remote Compellent Connections
Changing Advanced Remote Connection Properties
1 In the system tree, select an iSCSI card. The iSCSI information window appears.
2 Click the Remote Compellent Connections tab.
3 From the shortcut menu, select Properties. The Properties window appears
4 Click Advanced. The Advanced Remote Compellent Connection Properties
window appears.
5 Change any of the following:
• Port number
• Enable or disable data digest
• Enable or disable header digest
• Enable or disable immediate data
• Select a window size, from 16KB to 2048 KB
• Select a keep alive time-out, from 3 minutes to 18 hours
• Select a SCSI command data time-out, from 3 seconds to 18 hours
6 Click OK. The settings are changed.
Deleting iSCSI Remote Connections
1 In the system tree, select an iSCSI card. The iSCSI information window appears.
2 Click the Remote Compellent Connections tab.
3 From the shortcut menu, select Delete. The Delete iSCSI Remote Connection window
appears.