User's Manual

211

Configuring iSCSI IO Cards

All iSCSI IO Cards must be assigned static IP Address, Subnet Mask, and Gateway values

before the IO Cards can be used. The Configure iSCSI IO Cards wizard simplifies iSCSI IO

card configuration by allowing you to configure cards through a single wizard screen. If

iSCSI cards were not configured as part of initial setup, use the Configure IO Cards wizard

to configure both initialized and initialized cards.

 To configure an iSCSI IO card

1 From the Storage Management menu, choose

System > Setup > Configure iSCSI IO

Cards

. The

Configure iSCSI IO Cards

window appears.

Figure 174. Configure iSCSI IO Cards

Note Uninitialized cards display an IP Address of 0.0.0.0.

2 Enter IP Address, Subnet Mask, and Gateway values for all IO Cards.

3 Click

Save Configuration

to configure the iSCSI IO Card. A progress window appears

showing configuring and port refresh progress.

If any IO Cards have not been configured, a warning message is displayed. Select

Yes

to leave the IO cards uninitialized.

4 When configuration is complete, the wizard closes automatically.